Frequently Asked Questions: Injection errors are a common problem in the building materials industry. Using correct injection techniques is crucial, especially in concrete and mortar applications. Incorrect applications reduce the durability of the structure and lead to increased costs. Therefore, construction professionals must be well-aware of application errors. Below, we will detail common injection errors in building materials and their solutions.

Wrong Selection of Injection Material

Incorrect selection of grouting materials can cause significant problems in building construction. Materials that are incompatible with the properties of the application surface jeopardize the integrity of the structure. For example, grouting materials that are not water-resistant are prone to failure in humid areas. Therefore, detailed analysis must be conducted to select the appropriate material for the project. Sempoly on the website contains useful information on choosing the right material.

Incorrect Injection Pressure Adjustment

Incorrectly adjusting the injection pressure during application prevents the material from fully filling the desired area. Too high a pressure can damage the structure, while too low a pressure can prevent the voids from filling. Therefore, it is essential to adjust the pressure according to the structure of the application surface. Incorrect pressure settings increase costs and trigger structural problems. For more information, visit Sempoly. from the contact page you can get support.

Inadequate Surface Preparation Before Application

Before grouting building materials, the surface must be clean and dry. Without surface preparation, the grout cannot fully penetrate the structure. This negatively impacts the structure's durability. Furthermore, dirt, oil, and dust on the surface prevent the material from adhering. Therefore, the surface must be properly prepared before application. For detailed surface preparation information, please visit Sempoly. blog posts You can browse.

Improper Mixing of Injection Material

Failure to mix the material in the correct proportions reduces the quality of the grout. In particular, adjusting the water and binder ratios correctly directly affects the material's performance. Improper mixing not only reduces the structure's durability but also causes premature material deterioration. Therefore, the mixing process must be carried out carefully and in accordance with standards. Practical information on the subject can be found at Sempoly. on the website exists.

Neglecting the Post-Injection Drying Process

After the injection application, the material must be allowed to dry sufficiently. Neglecting the drying process can cause cracks and failure. Building materials achieve maximum performance with proper drying. Environmental conditions must also be taken into account during this process. For post-injection maintenance and monitoring, please contact Sempoly. from the contact page You can request help.